bing tracking image
  1. Trailer Leaf Springs
  2. Dexter
  3. Double Eye Springs
  4. 24-7/8 Inch Long
  5. 8000 lbs
  6. 7 Leaf
7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long
Dexter

7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long

Part Number: DX74XR
In Stock
$240.00
Trailer Leaf Springs
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for an 8,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter. Great Prices for the best trailer leaf springs from Dexter. 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long part number DX74XR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (331)
  • Q & A (0)
  • Photos

Dexter Trailer Leaf Springs - DX74XR

Highlights

  • 4,000-lb Spring Capacity (8,000-lb Axle): Handles heavy loads without sagging or bottoming out.
  • 24-7/8" Eye-to-Eye Length: Keeps proper axle alignment and ride height for stable towing.
  • 7-Leaf Steel Pack: Flexes to absorb bumps and reduce bounce on rough roads.
  • 1-3/4" Wide Leaves: Provides dependable strength for high-mileage or heavy-duty use.
  • 9/16" ID Nylon Bushings: Delivers a snug bolt fit and quieter suspension movement.
  • Double-Eye Design: Mounts securely to hangers and shackles for balanced, smooth travel.

Features to know about

Restores Strength to a Sagging Suspension: 7-Leaf Steel Spring Handles Heavy Loads

When your trailer’s ride height starts to sag or the suspension feels soft, this spring brings it back to spec. The 7-Leaf Double-Eye Spring is built for an 8,000-lb axle and carries 4,000 lbs per spring. Each of its seven 3/8" thick steel leaves flex together to take the load evenly, resisting shock while keeping the trailer level and stable. It’s a direct replacement for worn or flattened springs that have lost their arch and strength.

Smoother Ride Over Rough Roads: Flexing Double-Eye Design Soaks Up Bumps

This spring’s double-eye design allows it to move naturally with the road. The 24-7/8" eye-to-eye length gives consistent travel, and the flex in the leaf stack keeps your trailer from bouncing or jolting over uneven pavement. The result is a smoother, quieter ride that protects your gear and reduces wear on other suspension parts.

Durable Build for the Long Haul: Sturdy Steel with Nylon Bushings

Built to hold up under demanding use, the spring’s steel construction resists fatigue and corrosion. Each spring includes nylon bushings with a 9/16" inner diameter for smooth articulation at the mounting points. The 1-3/4" wide leaf pack distributes weight evenly across the axle, maintaining proper alignment and reducing stress on shackles and hangers.

Easy Replacement Setup: Standard Dimensions for Clean Installation

The spring measures 24-7/8" from center eye to center eye (unloaded) and 1-3/4" wide, with 11/16" eye diameters when the bushings are removed. One end mounts directly to a hanger, and the other connects to shackle straps or an equalizer for proper suspension travel. Replace springs in pairs to keep the axle geometry aligned and restore even ride height across the trailer.

Specs

Quantity

  • Quantity: 1 leaf spring

Weight and Capacity

  • Spring capacity: 4,000 lbs
  • Axle capacity: 8,000 lbs

Dimensions

  • Length from center of spring eye to center of spring eye (unloaded): 24-7/8"
  • Spring width: 1-3/4"
  • Eye diameter with bushing: 9/16"
  • Eye diameter without bushing: 11/16"
  • Leaf thickness: 3/8"
  • Number of leaves: 7
  • Additional dimensions: see table
Part Number A B C D
072-079-00 12-7/16" - 24-7/8" 1-3/4"

Technical diagram of Dexter 7-Leaf Double-Eye Spring showing labeled dimensions A, B, C, D with measurements for 8,000-lb trailer axle fitment.

  • A: 12-7/16"
  • B: -
  • C: 24-7/8"
  • D: 1-3/4"

Note

  • Important: To ensure proper axle alignment and suspension performance, leaf springs should always be replaced in pairs.

072-079-00 Dexter Axle Double Eye Trailer Leaf Spring - 7 Leaf - 4,000-lb Capacity





Customer Satisfaction Score:

Ratings & Reviews

4.7

329 reviews
Review sort icon
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for an 8,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

by:

Great spring! Doing very well year into it.



by:

I forgot to as about u bolts and left a message and no one return my call. Can't believe that they did not come with u bolts but we got them installed.



by:

I absolutely love them and getting ready to order road masters shocks kit



by:

etrailer was quick to reply to my inquiries and shipped the leaf springs that I required rapidly.



by:

etrailer is awesome. They delivered better than anticipated, ahead if time as usual. Happy customer, AGAIN!

Dana F. profile picture

Dana F.

7/8/2023

Fyi: I discovered my my recently purchased Dexter leaf spring for 8000# axles is made in CHINA. So disappointed! etrailer did a great job with ship and delivery. Their ad 360 view photos conveniently blurred the China reference. Dexter touts USA made. Don’t be fooled as I was. Know what you’re getting.

Katrina B. profile picture

Katrina B.

8/10/2023

I have gotten confirmation from the manufacturer that most of their products are made in the USA but for the leaf springs, they are currently made overseas.


by:

I called ETRAILER about there measurements online on this spring, asked them to remeasure the height of the spring from the leaf pack to the center of the eyelets, twice I was told the measurements were correct by two different people, I disagreed and ordered 1 for myself just to see, yes the measurements are wrong, the D measurement should be 3-3/4" not 1-3/4" I will be ordering more soon to complete my order and will be calling them again to hopefully change this measurement



by:

Made in China, so now I'm hoping they hold up better than my 7K springs did. They also come with plastic bushings, so have to order bronze separately. Size as advertised.



by:

I ordered four 4000# leaf springs and two sets of 4 brass bushings. The shipment arrived and the box was torn up. I opened the box to find 3 leaf springs and 1 set of bushings. I called etrailer and they shipped me the missing leaf spring and bushing set. I asked if they could overnight the items so that I could do the work as planned over a holiday weekend. They said that was not possible. So now I can only do one axle over the weekend. When I got to work I found 1 of the 4 bushings was damaged. I suppose it was smashed by one of the leaf springs. Now I will also have to order another set of bushings to replace the nylon bushing that I was forced to use. The leaf springs were already rusty so I assume the box sat in the rain somewhere. Initially I was blaming the shipper but the more I though about it, the problem is with etrailer. Who ships four 25lb+ leaf springs (loose, not even wired together) in a cardboard box with brass bushings? At a minimum the leaf springs should have been bound together, wrapped in plastic and packed in it's own box or even better wooden crate. This is the second item that I have received from Etrailer damaged. I I have bought all my trailer parts from etrailer over the years but now I will shop other stores.



by:

Disappointed the leaf spring on a 8000 lb axle would have nylon bushings.
The brass bushings in the broken spring I removed were shot. I don't expect the nylon to last long.



by:

Quality parts designed better than OEM, on time/early, no excuses!!



by:

Box was damaged but the bushings didn't fall out the hole made by the springs. I've ordered a 2nd set and they were packed better and box was in great shape.

Paul profile picture

Paul

6/8/2024

Springs are doing thier job.. no problems.



by:

Still holding up after 1 year..

Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

4/10/2025

Hoping for many more years to come!



by:

Work great



by:

The chat sales person was very helpful highly suggest to contact them with your order and project so they can help get all the correct parts



by:

I was told over the phone that these were dexter springs and made in America. They say made in China right on them. I also asked about equalizers and the person on the phone couldn’t help me. Not her fault she didn’t really have information.

Jenny N. profile picture

Jenny N.

8/29/2023

We did have it listed incorrectly on the site that the springs were made in the US and we have updated the product pages for it. I will reach out to you to answer any questions that you may have on the equalizers.



by:

Great spring pack has been serving us well! We use our fifth wheel full-time and these springs are still looking great a year later.



by:

Nicole is a Rockstar Customer Service rep. In this day and age, it's refreshing to talk with someone who listens to what you're looking for. She was quick and helped me make my decision. I just received my order this afternoon.
Thank you, Nicole & ETrailer, of course!



by:

Item was as described, will definitely order from etrailer again



by:

The Leaf Springs arrived very fast and worked great.



by:

It was great working with Odelia. Was glad to find the 8000lb. leaf springs for my 2017 Solitude fifth wheel rv. The shipping was great and arrived in 2 days with 2 left springs per box. Can't wait to get installed.



by:

My 3500lb leaf springs have failed for the second time so I upgraded to 4000lb springs, I had just upgraded my suspension with the CRE 3000 and wet bolt kit and along with the disc brake conversion I did last year so with the help from etrailer we are ready to put so more comfortable miles behind us. You can always count on the techs from etrailer to get you your parts and fix any mishaps that may come. Thanks etrailer.



by:

This was a direct replacement for the spring that broke. It was relatively simple to install, as long as you have the jacks and tools needed.



by:

Quality parts and quick shipping.



by:

This 8000# axle leaf spring is one of seven. Six of them on the trailer, and one as a spare. I upgraded from the 7000# leaf spring to the 8000# leaf spring. Keeps my 18,0000lb toyhauler from sagging. A great upgrade. Also might consider the upgrade on wet bolts and thicker shackles. You won't regret it.



by:

Springs are perfect and delivered quickly. The packaging did not fare well in shipment and shipper had taped the box back together the best they could. All parts are in fine shape with no damage.

Bradley profile picture

Bradley

4/2/2025

Springs are still operating properly.


25
25

See what our Experts say about this Dexter Trailer Leaf Springs

  • Replacement Leaf Springs For An Ice Shanty Trailer
    Hey Adam, 24-5/8" is a standard sizing for 2,000lb leaf springs so the 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long # e69SR is what you need. It unfortunately doesn't look like we offer a slipper spring in a higher capacity in a close enough length. You could weld on new hangers # APS4 to switch to double-eye leaf springs like the 3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles - 25-1/8" Long # e66SR for a bit more capacity to prevent the tires from...
    view full answer...
    Image 1 for Image 2 for Image 3 for Image 4 for
  • Recommended Replacement Leaf Springs for a Dexter 7k Axle
    Blane, what you're looking for is the 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles # DX74XR. This spring has a 4k capacity, will work with 8k axles, has 1 3/4" wide leaves. You'll notice that these springs are a bit shorter, but that's because Dexter measures their springs under load and we measure ours relaxed, which is why there is a difference.
    view full answer...
  • Replacement Leaf Springs for 2022 Grand Design Solitude With 7k Axles
    Hey JT! Sorry to hear about your trouble with the leaf springs. Hopefully there wasn't a lot of damage and everyone stayed safe. From what I have found the 26E-3500 is the same as the Dexter 072-027-00. This is the 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long # DX75CR. I recommend double checking the measurements of this leaf spring to make sure they line up with what was put on, see the attached photo. If you can find a 6-leaf double eye spring with a higher rating...
    view full answer...
  • Is The etrailer e89FV Have The Same Specs as the Dexter 072-079-00 Spring
    Hey, C.J.! Yes, The etrailer double eye spring part # e89FV would have the same specs as the Dexter 072-079-00, or part # DX74XR on our website. What kind of trailer are you working?
    view full answer...
  • Replacement Leaf Springs for 2022 Grand Design Solitude 310GK
    Hi Tom; Grand Design has a nice parts site that usually helps to narrow down replacement parts for their trailers. However, your particular trailer has 5 different possible axles. All of them are 7k or 8k so that helps a little bit. If you take a look at your axle tag you should be able to figure out which you have. In addition to the axle capacity you're going to have to measure the leaf springs. I went ahead and attached an article below which explains how to measure. With these two...
    view full answer...
  • Can 2022 Dutchmen Voltage Toy Hauler Use 24-7/8" Replacement Leaf Spring
    Yes, a 24-7/8" leaf spring will work for your 2022 Dutchmen Voltage. If you took the # DX74XR and flattened it out it would measure 26-3/8" which is right in line with what you have. Assuming you have 8,000 lb axles on your toy hauler this would work well as a replacement. I have attached a link to all of our 24-7/8" long leaf springs for your reference.
    view full answer...
  • Replacement Leaf Springs for 2022 Forest River Nitro XLR with 7000 lbs Axles
    Hey Brandon, Leaf springs are not trailer specific, so we would have to get some measurements based on your current setup. I've linked below our article on how to measure the old leaf springs and then that will help us to get you the correct replacement. Could you reply with your dimensions? From there, I'll get you some recommendations!
    view full answer...
  • Does Going to Trailer Leaf Spring with More Leaves Increase or Decrease Height of Trailer
    Hey Henry, that's a great question but the answer is that it depends...it depends on if your axle is above the leaf spring or below it. If your axle is above the leaf spring it wouldn't affect the trailer height. If below it would raise it. Since each leaf is about 1/2 inch thick the height difference would be right around 1/2 inch if you went with the # DX74XR since it's a 7 leaf spring vs. a 6.
    view full answer...
  • Are There Dexter Double-Eye Leaf Springs For 8k Axle Close to 25-5/8 Inches
    Hey Jason, While we don't have a 24-5/8 inch leaf spring for an 8k axle, we do have one that is close, the 24-7/8 inch long Dexter 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles # DX74XR. I know it's not specifically what you were asking, but I wanted to mention it just in case it can work for you as you mentioned the approximate 24-5/8 inch measurement (from center eye to center eye). This is the only length of double-eye spring we offer for 8k axles so hopefully it works for you.
    view full answer...
  • Replacement Leaf Spring for a 2024 Grand Design Influence 2903RL
    Hey Steve! I can't guarantee the 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles item # DX74XR is gong to be the correct spring even though your trailer's pretty new. We recommend measuring the springs with the weight off of them because they stretch out once you start using them and there's a lot of factors that speed this process up not just the age of the spring. Additionally, I do not have a database I can look up and see what specific spring your 2024 Grand Design Influence 2903RL...
    view full answer...
  • Can a 2022 Grand Design Momentum W/ 3.5K Springs Be Upgraded to 4K Springs
    Hey Kenny you can upgrade your leaf springs to a higher rated 4k spring like the 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles # DX74XR. I'm just going to need to know what your current spring measures from center eye to eye, as well as the spring seat center to spring seat center. From here I'd be happy to make a recommendation for a higher capacity spring.
    view full answer...
  • Determining The Correct Replacement Suspension Components For A 2018 Keystone Fuzion Toy Hauler
    Hey Brian, Starting with the leaf springs, you can go up in capacity but you'd have to go with 8k leaf springs since there aren't 7,500lb options available. The Dexter # DX74XR would be the correct fit since you have a 24-7/8" eye-to-eye measurement. For the equalizers I would definitely switch to something that has built in cushioning to help with ride quality and handle the extreme road shock you've been experiencing. I've seen bolts rub down through the equalizer from years of no...
    view full answer...
  • Recommended Leaf Springs and Shackle Kit for a 2021 Grand Design Solitude 346FLS
    Thanks for the picture! It's hard to say how much your springs have stretched out over 3 years but an inch seems pretty reasonable. If you have the ability to jack one side of the trailer up you could get a more accurate measurement. I would make sure you have the same amount of leafs as the 7-Leaf Double-Eye Spring item # DX74XR you were looking at because that will definitely affect your ride height and comfort if you're adding some. I did notice you have 7,000 lbs axles, item # e64SR...
    view full answer...
  • Replacement Leaf Springs for 20 Year Old Tandem Axle Trailer that Weighs 14k
    Hey Joel, do you know how long your current springs are? With that additional piece of info I can help you pick out a spring that would replace what you have as easily as possible. For example, the part # DX74XR is for an 8k rated axle and has a 4k rating per spring like you mentioned and it has a length of 24-7/8 inches which is pretty common for springs of this rating but I'd still check. With that said if your plan was to replace all of the hangers and equalizers at same time just...
    view full answer...
  • Picking Out Replacement Leaf Spring for Trailer
    Hey Vernon, I don't have a way to look up the length of your leaf springs so I would need you to get me the length of yours when the weight of the trailer is off of them. And if you can get me the axle capacity that would be all that I would need.
    view full answer...
  • Who Manufactures 8,000 etrailer Leaf Springs
    Hello Pat, The 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" # e89FV are our own product, so we're the manufacturer and they are made in China. The Dexter 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long # DX74XR are also made in China.
    view full answer...
  • How to Find Replacement Leaf Springs for 2024 Alliance Paradigm 385FL
    Hello John; to find replacement leaf springs for your 2024 Alliance Paradigm 385FL or any other trailer you need to know the axle capacity and the length. Since you already know it has 8k axles all that is left is to measure your current leaf springs. You can measure spring eye to spring eye or the flat length. I went ahead and attached an article below which includes a video showing how to measure. Our selection of 8k leaf springs is limited to one length right now so if it measures...
    view full answer...
  • Replacement Suspension Components For A 2024 Brinkley Model G 4000 5th Wheel Toy Hauler
    Hey Josh, There isn't a guide for us to see what Brinkley used when building your trailer so I would either need you to reach out to Brinkley or give us some measurements one the components you're needing replaced in order to pick out the correct replacements. For the leaf springs you'll need to lift the trailer using the leveling system and let the suspension hang. You can then measure from the center of one eyelet to the center of the other eyelet. For the wet bolts we need to know...
    view full answer...
  • Recommended Upgraded Leaf Springs for a Trailer Travel Trailer That Has Rubbing Tires
    Hey Bill, sorry to hear about all the trouble you're having but after looking at the pictures you sent in I'd have to agree with the tech. I think you're going to need to up your springs to a beefier set like the 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles # DX74XR. These springs, since they'll be bigger than the ones you have now, shouldn't go flat causing your tires to rub. The only way these would flatten would be if the trailer is overloaded, but since you're saying the trailer...
    view full answer...
  • Replacement Leaf Springs For A Brinkley Model G 3950 Fifth Wheel Toy Hauler
    Hey John, Brinkley unfortunately doesn't give us any kind of guide to know what components they used on your trailer so we'll need to take a quick measurement of your leaf springs to determine if the Dexter # DX74XR are the correct leaf springs. You'll first want to jack up the trailer using the leveling system to take the weight off of the suspension. Next you'll measure from the center of one eyelet over to the center of the other eyelet to determine the length. That measurement along...
    view full answer...
  • Upgraded Equalizer and Wet Bolt Kit For a 2019 Dutchmen Voltage 3615 Toy Hauler
    I do see your 2019 Dutchmen Voltage 3615 uses 7,000lb axles. You will most likely use the 24-7/8" Long Leaf Spring # e64SR if your flattened springs are 26" long. We do have the 8,000lb Springs # DX74XR if you are looking for a spring less likely to flatten over time. As for the equalizer while the an axle spread with 35" spring center will typically use the wider 7-3/4" Kit # K71-449-00 you could have the 5-3/4" Kit # K71-359-00. I would recommend looking into a cushioned equalizer like...
    view full answer...
  • Replacement Leaf Spring for 2024 Grand Design Momentum 351MS
    Hey Brad, it looks like your 2024 Grand Design Momentum 351MS has 7k axles so the 7-leaf 8k axle rated leaf spring part # DX74XR that you referenced would work great for you as long as the length matches. This is a 24-7/8 inch long spring.
    view full answer...
  • Dimensions of Dexter Leaf Spring # DX74XR
    Hey Billy, the B dimension of the leaf spring part # DX74XR that you referenced is 12-7/16 inches. The thickness of the leaves is .375 inch.
    view full answer...
  • Replacement Leaf Springs for 2022 Grand Design Trailer With 7,000 Pound Axle
    For a replacement leaf spring you need to know your axle capacity as well as the length of your current leaf springs. You will need to measure from center of one eye to center of other eye on your leaf spring that isn't broken. Since these are fairly new there probably isn't much sag but if the leaf spring is flat you will need to account for that. Also, you want to replace the leaf springs in pairs. For example, if you found that the leaf springs measured 24-7/8" long you could use the...
    view full answer...
    Image 1 for


< Previous



Do you have a question about this Trailer Leaf Spring?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Wilson B
Updated by:
Wilson B
Employee Manda E
Updated by:
Manda E
Employee Zach D
Video Edited:
Zach D
Employee Mike S
Written by:
Mike S
Employee Andy C
Installed by:
Andy C

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.